Internal Sliding / A14
The A14 system for internal sliding
doors and shutters with precision bearings is designed for use with
larger panels in residential and commercial installations. The straight
sliding track can be fixed by screwing directly through the track
to the head, or supported with a variety of side and head fix brackets.
The brackets allow either single or parallel tracks providing many
possible door opening combinations.
| SPECIFICATIONS |
| max
door weight |
250kg
(550lb) |
| max door
height |
3000mm
(10’) |
| max door width |
4000mm (13’ 1”) |
FIXING BRACKETS
A range of brackets has been designed to suit most installations.
All brackets should be fixed to the structure with appropriate screws/bolts.
CARRIERS
All A14 systems have steel ball bearings with either
nylon or steel tyres and are available in 2 or 4 wheel carriers.
All carriers have rated maximum door weights for reliable product
performance. For optimal quiet operation, Centor Architectural
recommends the combination of aluminium track and nylon tyres.
FLOOR GUIDES
The bottom of straight sliding doors is secured with either a fixed
blade guide inside a grooved door or a roller guide sliding in a
channel. The channel can either be fixed: to the bottom of the door
with the guide roller on the floor, or to the floor with the roller
guide on the bottom of the door.
TRACK
Track is available in roll-formed galvanised steel and extruded
aluminium. Aluminium track is available in satin and gold anodised
finishes. Track can be powdercoated upon request.
STRAIGHT SLIDING CONFIGURATIONS
Single sliding clear of opening
Bi-parting sliding clear to each side of opening
Parallel sliding clear to same side of opening
Parallel sliding opposite direction behind partition
ARCHITECTS AND SPECIFIERS
This system is suitable for metal and timber doors with a maximum
weight of 250kg (550lb). You can simply specify Centor A14, and
leave detailed component selection to the builder.
|
